Working with EPCs — End-to-End Renewable Energy Engineering Learn More
Blymyer Engineers provided the structural and electrical engineering package, calculations, and analysis for this single-axis tracking plant located in Kern County, California.
Single-Axis Tracking. Provided electrical, utility, structural engineering as well as complete and detailed design of 115-34.5kv substation.
Provided electrical and structural engineering for two plants on adjacent sites sharing the same substation. Designed to withstand high winds and flood conditions.
Single-axis tracking system on a challenging site. Designed and engineered to withstand a high snow load. Interconnected to Rocky Mountain Power.
Utility scale plant located on 230 acres of agricultural land. Part of Sacramento Municipal Utility District’s Feed-in Tariff program.
Single-axis tracking system located on 218 acres of agricultural land in rural Los Angeles County. Consists of more than 89,000 photovoltaic panels and 40 inverters, all delivering power to the California grid. Acquired by NRG Energy, Inc.
Ground-mount, single-axis solar photovoltaic facility located on 203 acres of agricultural land in Kings County, California. Comprised of more than 113,000 PV panels. Acquired by NRG Energy, Inc.
Provided complete design and structural and electrical engineering for this ground‐mounted, fixed‐tilt, utility-scale system. At the time, the largest PV system in Hawaii.
Topographically challenging site on 90 acres of agricultural land in Sacramento County. Includes single-axis trackers and a ground-mounted, fixed-tilt array. The plant was designed for Recurrent Energy and later acquired by Google.
Provided electrical and structural engineering for a fixed-tilt array designed to accommodate local construction practices
Roof Mount, Canopy Mount.
Electrical Engineering, Project Management, Construction Support.
Canopy Mount. Ground Mount. Electrical Engineering and Project Management. (photo credit: Solar Industry Magazine)
Solar modules are supported by custom-made canopies designed to blend with the surrounding architecture.
Rooftop solar systems at seven different Walmart stores in Central California.
Canopy-design solar systems for three separate U.S. Veterans Administration offices in Tampa, FL, and Martinez and Los Angeles, CA.
Provided preliminary layout, canopy design, and electrical and structural engineering.
Provided layout, electrical and structural engineering, construction management, and permitting assistance for seven building projects utilizing various rooftop systems including custom canopies.
16 campuses, San Jose, CA 2016
Engineer of record, solar canopy. Canopy Mount. DSA services, EOR, Fire, Access, Electrical Engineering.
23 schools, Lancaster, CA 2011
Provided site assessments, feasibility studies, general arrangements, and structural and electrical designs for PV systems at 23 schools, mounted primarily on carport and canopy structures. Permit sets were ready within one month, and all required approvals were obtained from the California Division of the State Architect (DSA).
13 schools – San Jose, CA 2010
Provided site assessments, feasibility studies, general arrangements, and preliminary structural and electrical designs for PV systems at 13 schools, mounted primarily on carport and canopy structures. Obtained all required approvals from the California Division of the State Architect (DSA).
13 schools – Pittsburg, CA 2010
Provided general arrangements and electrical and structural designs for PV systems at 13 schools, mounted on roofs and parking canopies. Obtained all required approvals from the California Division of the State Architect (DSA).
Oakland, CA 2010
Provided general arrangement and electrical and structural designs for a two-part PV system consisting of a set of modules mounted on parking lot carports and a set of ground-mounted modules near the football field. Obtained all required approvals for the project from the California Division of the State Architect (DSA).
5 schools – Fremont, CA 2008
Provided site assessments, feasibility studies, general arrangements, and preliminary structural and electrical designs for PV systems at five schools, mounted primarily on carports and canopy structures. Obtained all required approvals from the California Division of the State Architect (DSA).
Oroville, CA 2009
Provided general arrangement and electrical and structural design services for a carport-mounted PV system. Obtained all required approvals for the project from the California Division of the State Architect (DSA).
Hayward and Livermore, CA 2009
Provided general arrangements and electrical and structural designs for PV systems mounted on carport structures at each campus. Obtained all required approvals for the project from the California Division of the State Architect (DSA).
14 schools – Milpitas, CA 2008
Provided general arrangements and electrical and structural designs for PV systems at 14 schools, mounted on parking canopies and shade structures. Obtained all required approvals from the California Division of the State Architect (DSA).
Pre-approved design since 2008
Fifth-generation design accommodates any available module, offers maximum load for all soil and seismic conditions and meets all California Division of the State Architect (DSA) criteria.
3 colleges – Contra Costa County, CA 2007
Provided general arrangements and structural designs for PV systems at three colleges, mounted on carport structures at each campus. Obtained all required approvals from the California Division of the State Architect (DSA).