Solar
Eland, California City, CA
200MWAC
Energy modeling and complete engineering
Provided complete design and structural and electrical engineering for this ground-mounted, single-axis tracking utility-scale system, and substation design.
Muscle Shoals | Colbert County, Alabama
227MW
Oberon 1 & 2 | California
500MW
Red Mesa | Red Mesa, Utah
72MW
Highland | Highland County, Ohio
300MW
State Fund | 8 Sites
10.6MW
Hawaii Department of Education
4,500kW
Pinole Valley High School
418kW
Fremont Union School District |5 schools, CA
6.6MW
Las Positas Community College |Chabot, CA
2.2MW
Franklin-McKinley School District, CA
2.74MW
Energy Conservation Measures | City of San Jose, CA
MW
UC Davis West Village | Davis, CA
340kW
County of Shasta, CA | 16 Sites
2.5MW
Solar Blue | Stratford, California
250MW
Solar/PV, Energy Storage and Substation design
Eiffel | Paris, Texas
200MW
Chestnut | Kings County, California
196MW
Big Plain | Madison County, Ohio
196MW
Taygette 1 & 2 | Pecos County, Texas
500MW/1.5GWh
Energy modeling and complete engineering
Provided complete design and structural and electrical engineering for this ground-mounted, single-axis tracking utility-scale system, and substation design. Adds enough solar electricity to the U.S. grid to power 180,000 homes per year.
Prospero 1& 2 | Andrews, Texas
550MWAC
Energy modeling and complete engineering
Blymyer Engineers prepared the PVSyst report, site plan, general arrangement, and complete electrical and structural engineering, and substation design for a total of 550MWAC across two single-axis tracking utility-scale systems in Andrews, Texas.
Elara Solar, Pearsall, TX
130MWAC
Energy modeling and complete engineering
Blymyer Engineers provided complete electrical & structural engineering and substation design package, calculations, and analysis for this utility-scale single-axis tracking system.
Red Horse Solar
55MWAC
Energy modeling and complete engineering
Blymyer Engineers provided general arrangements and structural and electrical design for this single-axis tracking system located in Red Horse, Arizona. Provided complete, fully coordinated electrical plan set and calculations as well as structural design for all systems.
RE Barren Ridge, Kern County, CA
60MWAC
Energy modeling and complete engineering
Blymyer Engineers provided the structural and electrical engineering package, calculations, and analysis for this single-axis tracking plant located in Kern County, California.
AL Solar A Project
72MWAC
Chambers County, AL, 2017
Single-Axis Tracking. Provided electrical, utility, structural engineering as well as complete and detailed design of 115-34.5kv substation.
Springbok I and II Solar Plants
258MWAC
Kern County, CA, COD 2016
Provided electrical and structural engineering for two plants on adjacent sites sharing the same substation. Designed to withstand high winds and flood conditions.
Red Hills Solar Power Plant
80MW
Parowan, UT 2015
Single-axis tracking system on a challenging site. Designed and engineered to withstand a high snow load. Interconnected to Rocky Mountain Power.
McKenzie Power Plant
30MW
Galt, CA 2013
Utility scale plant located on 230 acres of agricultural land. Part of Sacramento Municipal Utility District’s Feed-in Tariff program.
Mayfair (TA High Desert) Power Plant
20MW
Lancaster, CA 2013
Single-axis tracking system located on 218 acres of agricultural land in rural Los Angeles County. Consists of more than 89,000 photovoltaic panels and 40 inverters, all delivering power to the California grid. Acquired by NRG Energy, Inc.
Kansas South Power Plant
20MW
Kings County, CA 2013
Ground-mount, single-axis solar photovoltaic facility located on 203 acres of agricultural land in Kings County, California. Comprised of more than 113,000 PV panels. Acquired by NRG Energy, Inc.
Kalaeloa
5MW
Kalaeloa, HI 2013
Provided complete design and structural and electrical engineering for this ground‐mounted, fixed‐tilt, utility-scale system. At the time, the largest PV system in Hawaii.
Dillard Power Plant
9.4MW
Sloughhouse, CA 2010
Topographically challenging site on 90 acres of agricultural land in Sacramento County. Includes single-axis trackers and a ground-mounted, fixed-tilt array. The plant was designed for Recurrent Energy and later acquired by Google.
Utility-scale solar site
5MW
Tuticorin, India 2012
Provided electrical and structural engineering for a fixed-tilt array designed to accommodate local construction practices
Broadway Mall plaza
Walnut Creek, CA, 2016
1,000kW
Roof Mount, Canopy Mount.
Electrical Engineering, Project Management, Construction Support.
City of Salinas
6 sites, 8 systems, City of Solinas CA, 2015
3,700kW
Canopy Mount. Ground Mount. Electrical Engineering and Project Management. (photo credit: Solar Industry Magazine)
Qatar Science & Technology Park
Doha, Qatar 2013
700kW
Solar modules are supported by custom-made canopies designed to blend with the surrounding architecture.
Walmart
7 locations in Central California, 2012
2.8MW
Rooftop solar systems at seven different Walmart stores in Central California.
U.S. Veterans Administration Hospital
3 locations in Florida and California, 2011-12
5.7MW
Canopy-design solar systems for three separate U.S. Veterans Administration offices in Tampa, FL, and Martinez and Los Angeles, CA.
U.S. Marine Corps Base Housing
Camp Lejeune, NC
5.4MW
Provided preliminary layout, canopy design, and electrical and structural engineering.
California Institute of Technology
Pasadena, CA 2010
1.4MW
Provided layout, electrical and structural engineering, construction management, and permitting assistance for seven building projects utilizing various rooftop systems including custom canopies.
Berryessa Union School District
16 campuses, San Jose, CA 2016
2,000kW
Engineer of record, solar canopy. Canopy Mount. DSA services, EOR, Fire, Access, Electrical Engineering.
Lancaster Unified School District
23 schools, Lancaster, CA 2011
5500kW
Provided site assessments, feasibility studies, general arrangements, and structural and electrical designs for PV systems at 23 schools, mounted primarily on carport and canopy structures. Permit sets were ready within one month, and all required approvals were obtained from the California Division of the State Architect (DSA).
San Jose Unified School District
13 schools – San Jose, CA 2010
7.2MW
Provided site assessments, feasibility studies, general arrangements, and preliminary structural and electrical designs for PV systems at 13 schools, mounted primarily on carport and canopy structures. Obtained all required approvals from the California Division of the State Architect (DSA).
Pittsburg Unified School District
13 schools – Pittsburg, CA 2010
4MW
Provided general arrangements and electrical and structural designs for PV systems at 13 schools, mounted on roofs and parking canopies. Obtained all required approvals from the California Division of the State Architect (DSA).
Merritt College
Oakland, CA 2010
1.2MW
Provided general arrangement and electrical and structural designs for a two-part PV system consisting of a set of modules mounted on parking lot carports and a set of ground-mounted modules near the football field. Obtained all required approvals for the project from the California Division of the State Architect (DSA).
Fremont Union School District
5 schools – Fremont, CA 2008
6.6MW
Provided site assessments, feasibility studies, general arrangements, and preliminary structural and electrical designs for PV systems at five schools, mounted primarily on carports and canopy structures. Obtained all required approvals from the California Division of the State Architect (DSA).
Butte Community College
Oroville, CA 2009
411kW
Provided general arrangement and electrical and structural design services for a carport-mounted PV system. Obtained all required approvals for the project from the California Division of the State Architect (DSA).
Chabot – Las Positas Community College
Hayward and Livermore, CA 2009
2.2MW
Provided general arrangements and electrical and structural designs for PV systems mounted on carport structures at each campus. Obtained all required approvals for the project from the California Division of the State Architect (DSA).
Milpitas Unified School District
14 schools – Milpitas, CA 2008
3.4MW
Provided general arrangements and electrical and structural designs for PV systems at 14 schools, mounted on parking canopies and shade structures. Obtained all required approvals from the California Division of the State Architect (DSA).
Pre-approved parking canopy and shade structure design with California Division of the State Architect (DSA)
Pre-approved design since 2008
Fifth-generation design accommodates any available module, offers maximum load for all soil and seismic conditions and meets all California Division of the State Architect (DSA) criteria.